10 gallon mash tun for about $65 bucks
3 posters
Page 1 of 1
10 gallon mash tun for about $65 bucks
I just made this 10 gallon mash tun for about $65. Took about 15 minutes to assemble.
10 gallon cooler-Home Depot $39.96 plus tax
Stainless braid, washers, valve, tee, and 3 pieces of pipe-Menards $18 plus tax
[img][You must be registered and logged in to see this link.][/img]
[img][You must be registered and logged in to see this link.][/img]
10 gallon cooler-Home Depot $39.96 plus tax
Stainless braid, washers, valve, tee, and 3 pieces of pipe-Menards $18 plus tax
[img][You must be registered and logged in to see this link.][/img]
[img][You must be registered and logged in to see this link.][/img]
BassClefBrews- Posts : 155
Points : 5463
Join date : 2010-01-05
Location : Crown Point
Re: 10 gallon mash tun for about $65 bucks
Is that a 3/8" valve or 1/2" ?
And do you have any plans for a false bottom?
I have been thinking of trying to make one out of a cheap large cutting board, if I can find one that's ridgid, cheap, and microwave safe. Cut it to shape and then drill a thousand holes in it
And do you have any plans for a false bottom?
I have been thinking of trying to make one out of a cheap large cutting board, if I can find one that's ridgid, cheap, and microwave safe. Cut it to shape and then drill a thousand holes in it
Whatever- Posts : 94
Points : 5409
Join date : 2009-12-12
Age : 47
Location : United States Of America
Re: 10 gallon mash tun for about $65 bucks
3/8" valve that way you can use the gasket that is already in it.. No plans on a false bottom, works great! The research I've done about making a false bottom all points to buying a pre-made one, it would be more cost effective to me.
BassClefBrews- Posts : 155
Points : 5463
Join date : 2010-01-05
Location : Crown Point
Very nice
Does Menards seem to have a bigger selection of pipe, fittings and washers? I tried to put something together when I went to lowes the other day and their selection of couplers and such were pathetic. Ive got to get my two coolers setup and I have a hard time paying $20 for 1 bulkhead.
electricjesus- Posts : 3
Points : 4805
Join date : 2011-03-20
Age : 54
Location : Cedar lake
Re: 10 gallon mash tun for about $65 bucks
Menards has the best selection of fittings and the cheapest prices.
BassClefBrews- Posts : 155
Points : 5463
Join date : 2010-01-05
Location : Crown Point
Similar topics
» To mash or not to mash...
» Five or Ten gallon batches.
» Most efficient burner...which btu rating and fuel is the best mix of power & efficiency?
» 2-20 gal SS mash tuns w/false bottoms
» 10 gallon Rubbermaid Cooler
» Five or Ten gallon batches.
» Most efficient burner...which btu rating and fuel is the best mix of power & efficiency?
» 2-20 gal SS mash tuns w/false bottoms
» 10 gallon Rubbermaid Cooler
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|